en_US
pegson-1412
sbm-tesab-barsextec-barmetso-bars

Blowbars/ Hammers / Impeller Bars/ Impact Bars / Impact Hammers for Eagle® UltraMax® Recycle Stealth UM 1000-15CC

At Samscreen, we're pleased to provide replacement crushing products for numerous crushing situations. Our Blowbars/ Hammers / Impeller Bars/ Impact Bars / Impact Hammers are manufactured for a wide variety of applications, and made to fit in Eagle® UltraMax® Recycle Stealth UM 1000-15CC. When you need Blowbars/ Hammers / Impeller Bars/ Impact Bars / Impact Hammers for your Eagle® UltraMax® Recycle Stealth UM 1000-15CC, Samscreen will likely either have it in stock or will be able to manufacture it to your exact specifications. You can trust our engineers to be experienced in the aggregate field and provide you with Blowbars/ Hammers / Impeller Bars/ Impact Bars / Impact Hammers of the best quality and perfect fit for your Eagle® UltraMax® Recycle Stealth UM 1000-15CC.

Samscreen’s blow bars feature our exclusive MAXWEAR technology.

Just because a blow bar looks like, weighs the same and supposedly has the same chemistry, does not mean that they are the same and only bars with Samscreen’s MAXWEAR logo cast into the body can call themselves MAXWEAR. All Samscreen blow bar metallurgies are infused with MAXWEAR Ceramic insert technology (MAXC) which increases wear life significantly, giving the bars extreme wear resistance coupled with the benefits of the base metallurgy. Choose from Samscreen’s standard blow bar offerings:
  • SAM-2 (+MAXC): Martensitic alloy, great resistance to impact, a medium resistance to abrasion. Usually recommended for the recycling business or working conditions where there’s possibility of uncrushable objects entering the crusher chamber (excavator tooth, rebar, etc). Also, in cases where there is excessive feed size. This is the most versatile alloy, and in case of doubt, provides a great wear option and with no risk of breakage.
  • SAM-25.1/SAM-25BC/SAM-25HC (+MAXC): These are different variations of high chrome with high hardness, great abrasion resistance, and lower resistance to impact. To be applied where working conditions are such that there’s almost no chance of big feed size or uncrushable objects being introduced. We recommend it for tertiary and some secondary crushing with a prepared and consistent feed size. Feed size control should be 10% smaller in size than the one indicated by the crusher manufacturer, and if possible, Metal Detectors are strongly recommended. The crusher setup, blow bar geometry and working conditions will determine selection.
  • SAM-550/SAM-600 (+MAXC): Also high chrome, but in comparison to SAM-25.1/SAM-25BC/SAM-25HC (+MAXC), these have slight lower hardness. In the case of incomplete data on the crushing environment but suggesting a high chrome bar, these are good starting points. The crusher setup, blow bar geometry and working conditions will determine selection.
Metalurgy StockPriceQty
Martensitic Available For Custom Order
spinner
Medium Chrome Available For Custom Order
spinner
High Chrome Available For Custom Order
spinner
Ceramics Available For Custom Order
spinner