es_ES

Criba de reemplazo de cuerda de piano de Samscreen

Criba de cuerda de piano

Samscreen se complace en ofrecer una criba de reemplazo de cuerda de piano de calidad para prácticamente todas las marcas y modelos de las plantas de cribas portatiles y estacionarias, Además, podemos fabricar las cribas de
cuerda de piano
personalizadas. Nuestro experimentado personal de atención al cliente puede ayudarle asegurar que obtenga la malla correcta.

Product Description

See How Much You Can Save With Pianowire

Samscreen está orgulloso ofrecer una criba de reemplazo de cuerda de piano para todas las marcas y modelos de plantas de cribas portatiles, y podemos fabricar las cribas para aplicaciones de criba y máquinas personalizadas. Somos reconocidos como el fabricador principal de cribas de cuerda de piano para el mercado de criba portátil, nuestros experimentados ingenieros pueden ayudarle asegurar que obtenga la criba correcta.

We offer a variety of piano wire types to choose from, and all of our wire is of the highest grade available and manufactured to strict quality tolerances. Our wire types include:

  • Cuerda de Piano para Trabajo Pesado – el producto de cuerda de piano de primera de Samscreen. Calidad superior y rendimiento duradero.
  • Alambre de Música de Primera Calidad – Alambre estándar de Samscreen. Esta es alambre de música de alta calidad.
  • 3Alambre de Acero Inoxidable 304 – Alambre de acero inoxidable 304 de alta calidad. Recomendado para material que es pegajosa, húmeda y corrosiva.
  • Alambre de Maxwear – Un alambre de tension alta. Recomendado por abrasion alta y aplicaciones altas.

Samscreen ofrece nuestro criba de reemplazo de cuerda de piano en una amplia gama de estilos que incluye tapado ronda, duro y cuadrado, y estilos de gancho para incluir un gancho de 45 grados, gancho cuadrado, y gancho redondo.

Podemos fabricar una apertura en cualquier tamaño con cualquier tamaño de alambre disponible que requiere.

El tiempo de inactividad es costoso, por lo que trabajamos para asegurar que reciba su criba de reemplazo de cuerda de piano rápidamente. Nunca comprometemos la calidad, porque es importante para nosotros que nuestros clientes puedan regresar a trabajar en el tiempo más corto posible. Tenemos un gran variedad de pre-hechos cribas de cuerda de piano para las máquinas más populares. Podemos fabricar cribas de reemplazo de cuerda de piano de calidad a sus especificaciones. Simplemente llámenos al +1-607-722-3979 y estaremos encantados de ayudarle con sus necesidades de las cribas de reemplazo de cuerda de piano.

Samscreen se complace en ofrecer una amplia variedad de cribas de reemplazo y productos cribados para ajustarse a las siguientes máquinas de cribado:

Para su comodidad, Samscreen se complace en ofrecer estos productos cribados, además de nuestras cribas de reemplazo de cuerda de piano:


Especificaciones
Opening Standard Wire Std-Heavy Wire Heavy Duty Wire
1mm (3/64″) .50mm (.020″) .65mm (.026″)
1.5mm (1/16″) .65mm (.026″)
.80mm (.031″)
2mm (3/32″)
.65mm (.026″)
.80mm (.031″)
3mm (1/8″)
.80mm (.031″)
1.0mm (.039″)
4mm (5/32″)
1.0mm (.039″)
1.2mm (.047″)
5mm (3/16″)
1.0mm (.039″)
1.2mm (.047″)
6mm (1/4″)
1.2mm (.047″)
1.4mm (.055″)
2.0mm (.079″)
8mm (5/16″) 1.4mm (.055″) 1.6mm (.063″) 2.0mm (.079″)
10mm (3/8″) 1.4mm (.055″) 1.6mm (.063″) 2.0mm (.079″)
12mm (.5”) 1.6mm (.063″) 1.8mm (.070″) 2.0mm (.079″)
16mm (5/8″) 2.0mm (.079″) 2.5mm (.098″)* 3.0mm (.118″)*
19mm (3/4″) 2.0mm (.079″) 2.5mm (.098″)* 3.0mm (.118″)*

* diameter not available in Maxwear

    Installation Instructions

    Installation

    Samscreen suggests some instructions regarding the installation and removal of the piano wire. The following are the some of the most important steps to kept in mind:

    • Remove the Samscreen from the box. Be careful with heavy wire screens as they are packed under tension and may spring out when unrolling them.
    • Place the first hook at the anchor end of the screen box. Make sure that it seats itself correctly.
    • Pull the screen towards the tension end of the screen box. Spread the moving profile strips to match up with the cross members of the screen box.
    • Place the free hook in the tension envelope and insert the spring/tension bar. Make sure that the tension bar is all the way to the back of the hook and seated properly.
    • Take up the slack in the screen by tightening the tension nuts. When the wires in the screen have initially straightened make sure the anchor end hook is still seated, that the profile strips are located right above the cross members and that the tension bar is seated correctly in the back of the tension hook.
    • Start to tension the screen. Use two turn increments and rotate the order of tightening. Continue to tighten in this manner until the screen is taut. It is normal for center wires to tighten first and then the outside wires. If you experience the opposite loosen the screen and check that the spring bar has been inserted the correct way.
    • Proper tension is achieved when all the wires on the screen are tight. It should be possible to run your fingers over the screen and pluck individual wires and hear them sing.
    • Make sure that the profile strip has seated itself correctly over the cross members and that it is straight across the deck.
      Run the machine for one or two hours, the stop it and check tension on the screen again. Tighten again if necessary.

    Removal

    • Turn screening plant off and wait for the screen box to stop vibrating and all moving parts to stop moving.
    • Go to the tension end of the screen box and loosen the tension nuts on the side of the screen box. If there are four nuts loosen them in half turn increments and in rotation until the tension is off the screen you are removing. If there are two nuts, loosen them in half turn increments also. Once the tension is released, it is OK to remove the nuts completely. If the tension “UBOLT” can fall away from the machine leave the nuts turned one or two threads.
    • Remove the piano wire screen from the tension envelope. This may be achieved by hitting the spring or tension bar with a rubber mallet. If you have removed the tension nuts completely, stay clear of the hook and spring bar as they exit from the tension envelope.
    • Remove the spring bar from the hook. If the clearance is available simply leave the spring bar in position and push the screen towards the anchor end. If the clearance is not available, slide the spring bar through the tension take up slot in the screen box sides.
    • Pull the hook from the anchor end and discard the screen in a suitable container.
      Check the tension and anchor ends of the screen box for material build up that may interfere with the installation of the new screen. Also check the cross members for any wear, looseness or bends. If any of these conditions exist, they must be repaired prior to installation of the new screen because un-repaired they will have a negative effect on the service life of the screen
    Styles

    Profile Styles

    Samscreen, Inc. has long been recognized as the leading manufacturer of piano wire screens for the portable screening market. Samscreen has a wide range of profile styles to choose from such as round capping, duro, square and many more.

    For Square Bucker Bar / Flat Channel

    For Round-top Capping Rubber

    For Round Metal Bucker Bars or Round-top Rubber

    For Round Metal Bucker Bars or Round Top Rubber

    For Square Bucker Bars / Flat Channel

    Hook Styles

    Samscreen, Inc. has a range of piano wire hook style to choose. Some of the style includes 45 degree hook, square hook and round hook.

    Square End Hooks
    Round End Hooks
    Angled End Hooks

    Standard Openings & Wire Sizes

    We can manufacture any size opening with any available wire size you require. Please remember, however, that heavy-duty wire on smaller openings can be hard to install.

      The Samscreen Difference

      Piano Wire Screens

      • Same day, 24-hr customization
      • 3 wire types
      • .5 to 5mm wire diameter range
      • Multiple profile choices, multiple hooks
      • Any aperture
      • Ability to produce the widest and longest screens
      • Ease of installation
      • Most cost-effective screen on the market (cost per ton produced – Quality of wire, longevity of screen)
      • All screens individually tested for fit and accuracy (hydraulic stretcher)

      La Diferencia de Samscreen

      • El tiempo de respuesta la mas rapida en la industria
      • Una infusión de la Tecnología de Maxwear™ (una vida útil máxima)
      • Garantía de desgaste y costo de Samscreen (el mejor, más rentable producto en el mercado basado en el precio por tonelada producida)
      • Fabricación totalmente integrado
      • CNC rodante, CNC mecanizado
      • Ingeniería en la fábrica
      • Personalización y aprobación previa de dibujos para cada orden
      • Utiliza materias primas domesticas, con certificaciones y trazabilidad
      • Hecho en los Estados Unidos
      • Cumple la norma ISO
      • Amplio conocimiento de la industria y experiencia